Part Number Hot Search : 
0U60D 150K10 RE46C UF4004G 50PFR80W 74ACT 1N5622 2N3904
Product Description
Full Text Search
 

To Download CDMG16008-03 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Part No: CDMG16008-03 Description: micro dynamic speaker
Date: 10/18/2006 Unit: mm Page No: 1 of 6
Specifications
Dimensions Impedance Resonant frequency Sound pressure level Response Distortion Input power Operation Buzz, rattle, etc. Magnet Operating temp. Weight Material RoHS o16.0 x 2.55 mm 8 Ohm 15% at 1.0 KHz 1 V 600 Hz 20% at 1V 82 dB/w 3 dB 0.3 w 10 cm at 1.0K, 1.2K, 1.5K, 2.0K Hz 69 dB/w 3 dB 1 w 1m at 1.0K, 1.2K, 1.5K, 2.0K Hz Fo Hz ~ 20 KHz max. 10% max. at 1.0 KHz 0.3W Nominal 0.3 W Handling capacity 0.5 W must be normal at program source 0.3 W must be normal at sine wave 1.55 V Nd-Fe-B -20 ~ +55C 1.5 g Metal yes
Mechanical Drawing
Tolerance: 0.5
Week 01 02 . . Year 05---2005 06---2006 . .
2.55 0.2 0.85 0.1 16.0 0.2
7.25
SOLDERING POINT
1.5 0.05
BLACK POLYESTER
The mylar won't exceed the metal frame when input 0.3W
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CDMG16008-03 Description: micro dynamic speaker
Date: 10/18/2006 Unit: mm Page No: 2 of 6
Frequency Response Curve
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CDMG16008-03 Description: micro dynamic speaker
Date: 10/18/2006 Unit: mm Page No: 3 of 6
Measurement Circuit
Week 01 02 . . Year 05---2005 06---2006 . .
2.55 0.2 0.85 0.1 16.0 0.2
7.25
SOLDERING POINT
1.5 0.05
BLACK POLYESTER
The mylar won't exceed the metal frame when input 0.3W
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CDMG16008-03 Description: micro dynamic speaker
Date: 10/18/2006 Unit: mm Page No: 4 of 6
Mechanical Characteristics
Item PCB Wire Pull Strength Evaluation Standard Test Condition The pull force should be applied to double lead No damage or cutting off. wire: Horizontal 3.0N (0.306kg) for 30 seconds The speaker should be measured after applying No obstacle will be harmful to a vibration amplitude of 1.5 mm with 10 to normal operation; damage, 55 Hz band of vibration frequency to each of cracks, rust, and distortions. the 3 perpendicular directions for 2 hours. Should not be audible at 1.55 V The part will be dropped, contained inside a sine wave between Fo ~ 20 KHz. normal box, from a height of 75 cm onto a 40 mm thick wooden board 10 times.
Vibration
Drop Test
Environment Test
Item High temp. test Low temp. test Humidity test Temp. cycle test Test Condition After being placed in a chamber at 55C for 96 hours. After being placed in a chamber at -20C for 96 hours. After being placed in a chamber at +40C and 90% relative humidity for 96 hours. The part shall be subjected to 5 cycles. One cycle will consist of: Evaluation Standard
The speaker will be measured after being placed at +25C for 6 hours. No obstacle will be harm ful to normal operation; damage, cracks, rust, and distortions. Should not be audible at 1.55 V sine wave between Fo ~ 20 KHz. The SPL should be within 3dB compared to the initial measurements.
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CDMG16008-03 Description: micro dynamic speaker
Date: 10/18/2006 Unit: mm Page No: 5 of 6
Reliability Test
Item Load Test Test Condition 0.3 W white noise, applied for 24 hours, at room temperature. Evaluation Standard The speaker will be measured after being placed at +25C for 6 hours. No obstacle will be harm ful to normal operation; damage, cracks, rust, and distortions. Should not be audible at 1.55 V sine wave between Fo ~ 20 KHz. The SPL should be within 3dB compared to the initial measurements.
Test Conditions
Standard Test Condition Judgement Test Condition a) Tempurature: +5 ~ +35C a) Tempurature: +25 2C b) Humidity: 45 - 85% b) Humidity: 60 - 70% c) Pressure: 860-1060 mbar c) Pressure: 860-1060 mbar
Recommended Temperature Profile for Hand Soldering
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Part No: CDMG16008-03 Description: micro dynamic speaker
Date: 10/18/2006 Unit: mm Page No: 6 of 6
Packaging
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062


▲Up To Search▲   

 
Price & Availability of CDMG16008-03

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X